Into Blinds Product Warranty
1. WarrantySubject to the terms and exclusions below, Into Blinds Pty Ltd ACN 137 456 672 (Into Blinds) warrants that the following products supplied and installed by Into Blinds (Goods) will be free from all defects due to faulty design, materials or workmanship (either in the Goods or installation) (the Warranty). It is important that you read this document carefully and in its entirety in order to understand when the Warranty does and does not apply, and how to make a Warranty claim. (Warranty is not Transferable)(Warranty does not apply to DIY Blinds or Blinds not installed by Into Blinds)
2.1 The Warranty applies to the following Goods:
(a) Roller Blinds (also known as Holland Blinds);
(b) Vertical Blinds;
(d) Roman Blinds;
(e) Panel Glide Blinds;
(f) Motorised Blinds;
(g) Awning Blinds;
(h) Twin Blinds;
2.2 The Warranty will cover:
(a) subject to paragraph 2.2(b), for five years (unless a shorter warranty period is specified), replacement of defective materials and parts;
(b) for one year, replacement of defective materials and parts on Goods manufactured overseas;
(c) for one year, labour to:
(i) replace or repair defective material and parts;
(ii) resolve puckering of material where material is under 2 metres in width; and
(iii) rectify manufacturing faults.
2.3 The Warranty will NOT cover:
(a) marks or imperfections in, holes or runs in, or fraying of the material which occurs more than 30 days after installation;
(b) products that shrink or expand due to weather conditions;
(c) puckering of material where material is over 2 metres in width;
(d) lines, creases or waves. ( leave product in down or closed position for up to 3 months )
(e) imperfections that are not visible to the naked eye from a distance of 1.5 metres;
(f) uneven rolling of linked blinds;
(g) products with a drop of 3.3 meters or more;
(h) roller blinds under 600mm in width; or
(i) blinds/products installed into plaster or other non-standard structures. Non-standard refers to any structures other than timber or aluminium frames and/or timber architraves. we take no responsibility for the strength of any surface we fix into.
(j) gaps between blind fabric and window frame or architrave (up to 20mm) for infit(inside fit) for the following blinds, roller/holland blinds, vertical blinds, venetian blinds, twin blinds, panel blinds, roman blinds, honeycomb/cellular blinds.
(k) gaps between curtain fabric and floor (up to 50mm) for infit(inside fit) and outfit(outdie fit) the following curtains, blockout & sheer curtains.
(l) variation in speed of motorised blinds(motorised roller blinds have a variation of up to -/+ 10% in speed and accuracey as per manufacturer specifications)
3. Plantation shutters
3.1 The Warranty applies to the following Goods:
(a) Fauxwood (PVC) Plantation Shutters;
(b) Paulownia (timber) Plantation Shutters; and
(c) Aluminium Plantation Shutters.
(d) Designer Shutters
3.2 The Warranty will cover:
(a) for five years, fading or peeling which has occurred consistently across the inside and outside of panels and the framing;
(b) for five years, warping, bowing or twisting of the panels and/or framing due to the materials, manufacturing or installation; and
(c) for one year, defects in parts and mechanisms (including screws, hinges and control bars) and labour; and
(d) if noticed on or within seven days of installation, broken blades, cracks in frames or panels, paint or dint blemishes.
(e) for one year, budget pvc plantation shutters.
3.3 The Warranty will NOT cover:
(a) inconsistent fading or peeling (for example, only on the outside of the shutters);
(b) Warping, bowing or twisting of the panels and/or framing caused by environmental issues and/or mistreatment;
(c) imperfections that are not visible to the naked eye from a distance of 1.5 metres;
(d) broken blades, cracks in frames or panels, paint or dint blemishes noticed or occurring more than seven days after installation; or
(e) shutters that come away from the wall due to installation with architraves.
If we have replaced your Paulownia (timber) Plantation Shutters due to fading or discolouration of the stain, the Warranty will not cover the replacement shutters if you select the same or a different stain colour. The Warranty will only cover the replacement shutters if you choose a white or painted colour in Paulownia (timber), or Fauxwood (PVC) Plantation Shutters as a replacement.
4.1 The Warranty applies to the following Goods:
(a) Security Doors; and
(b) Fly Screens.
4.2 The Warranty will cover:
(a) for ten years, stainless steel mesh;
(b) for five years, galvanised mesh;
(c) for two years
(iv) locks and handles;
(v) frames; and
(vi) grills; and
(d) for one year, labour.
4.3 The Warranty will NOT cover:
(a) any of the following occurring more than 14 days after installation:
(i) locks coming out of line (this mostly occurs in new homes); or
(ii) door jams that expand or shrink due to weather conditions; or
(b) any of the following occurring more than 7 days after installation:
(i) holes or tears in Fly Screen mesh;
(ii) holes or tears in mesh, or sagging of, Fly or Tuff mesh doors;
(iii) dents, holes in mesh, or mesh coming out of frames in DVA fly doors;
(iv) sagging of Fly or Tuff meshed hinged doors without grills;
(v) scratches on aluminium frames or handles; or
(vi) adjustment of door closers.
5.1 The Warranty applies to the following Goods:
(a) timber fencing;
(b) pool fencing;
(c) gates; and
(d) picket fencing,
provided by Into Blinds Pty Ltd trading as Into Fencing.
5.2 The Warranty will cover:
Materials and labour to rectify defects in workmanship for one year.
5.3 The Warranty will NOT cover:
(a) splitting, shrinking, gaps or natural knots in the timber; or
(b) soil conditions causing sloping of posts.
Note: Where we are able to make a claim in relation to a warranty provided by a third party supplier of fencing materials, we will (to the extent permitted by law) pass on the benefit of the supplier warranty to you.
6. General Exclusions
Despite anything in this document, and in addition to the product-specific exclusions, the Warranty does not apply to the following:
(a) Goods ordered prior to 9 February 2012, in which case a one year warranty applies to all Goods on the terms set out in this Warranty;
(b) Goods that have not yet been paid for in full (other than where third party credit has been provided);
(c) normal wear and tear of the Goods;
(d) failure to follow any procedures specified or recommended by Into Blinds;
(e) any act or circumstance beyond Into Blinds' control, including tampering, unauthorised repairs or modifications, misuse, abuse, accident or damage caused by animals or natural events;
(f) labour costs after 12 months following installation;
(g) for online orders or where the client provides measurements and handles installation:
(i) failure by the client to properly measure windows or doors, or supply of incorrect measurements by the client; or
(ii) failure by the client to properly install any self-installed Goods; or
(h) consequential loss, whether direct, indirect or economic and whether arising in contract, tort or otherwise.
7. To make a Warranty Claim
7.1 Making a Warranty Claim
To make a Warranty claim, a client must, within 14 days of discovering a defect in the Goods:
(a) advise Into Blinds of the details of the defect; and
(b) provide to Into Blinds details of the purchase of the Goods and proof of purchase reasonably acceptable to Into Blinds.
7.2 Service Fee
(a) Into Blinds will charge a $110.00 service fee (Service Fee) to attend a client's premises to inspect Goods that are the subject of a Warranty claim.
(b) The Service Fee will be refunded if:
(i) the alleged defect is covered under this Warranty and the Warranty claim is made within 12 months of installation; or
(ii) a consumer guarantee applies under the Australian Consumer Law (see clause 9).
(c) If the alleged defect is not covered under this Warranty or by a consumer guarantee under the Australian Consumer Law, or a Warranty claim is made later than 12 months after installation, the service fee will not be refunded and the client will also be required to pay the cost of labour and parts.
7.3 Repair or replacement
If the Warranty or a consumer guarantee applies, Into Blinds will arrange with the client for the rectification of the alleged defect to be carried out, or (at Into Blinds' option) for new Goods to be installed. Into Blinds will not be responsible for any costs incurred by the client in notifying Into Blinds of the defect in the Goods.
7.4 No extension to Warranty period
Repairs carried out or replacements provided under this Warranty do not extend the relevant warranty period, and do not initiate a new warranty period. The warranty period for any replacement parts or new Goods installed will end together with the initial Warranty.
8. Things you should know
(a) There will be gaps between the edge of your Blinds and your architraves, if your blinds are mounted on the inside on the window frame, meet in the corner, or butt together.
(b) Your windows may not be perfectly square and your Blinds may not always sit straight or perfectly flat if this is the case.
(c) If you operate your Blinds up and down gently, this will help for the long term life of your Blinds.
(d) Into Blinds does not advise clients to install Roman Blinds on doors due to the fact that the height will take up the percentage of the doors and there is a chance you may brush your head against the bottom panel. We strongly advise the installation of Roller Blinds on doors as an alternative.
(e) Venetian Blinds are not designed to be lifted up and down on a regular basis. To get the most life out of your Venetian Blinds, we therefore advise to open Venetian Blinds by tilting the slats horizontally rather than lifting the blinds completely.
(f) It is required by law to have child safety locks installed with your blinds. All of Into Blinds' installations are installed with child safety locks.
(g) Subject to the Australian Consumer Law, Into Blinds' responsibility under this Warranty will not exceed the purchase price of the Goods or their replacement.
(h) The benefits given by this Warranty are in addition to other rights and remedies you may have under a law in relation to the goods to which the Warranty relates.
(i) In the event of damage at your property Into Blinds will patch/putty holes or cracks only, we will not be responsible for painting.
9. Australian Consumer Law
(a) The Goods and their installation come with guarantees that cannot be excluded under the Australian Consumer Law. Any exclusions in this Warranty are subject to the Australian Consumer Law, and this Warranty does not override or alter your rights under the Australian Consumer Law. The client is entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. The client is also entitled to have the Goods repaired or replaced if the Goods fail to be of acceptable quality and the failure does not amount to a major failure.
(b) Where a failure does not amount to a major failure, Into Blinds will provide, at Into Blinds' option, a repair, replacement or refund for the Goods. If the Goods are, or a component of the Goods is, no longer available and the Goods cannot be repaired, Into Blinds will, in its absolute discretion, replace the Goods with a substitute item.
Cleaning Your Blinds.
1. We recommend a regular dusting of your blinds using a feather duster to prevent any dust build up.
2. For common dirt and marks we recommend using a sponge soaked in lukewarm water and gently treating the area.
3. Into Blinds accepts no responsibility for any damage to your blinds caused by cleaning and by the use of detergents.
This Warranty is provided by Into Blinds Pty Ltd.
44 Latitude Boulevard Thomastown Victoria 3074
1300 24 25 26
We hope you enjoy your Into Blinds experience